Reuleaux RX200S
0.96inch Large Screen Display
200W High Power Output
Variable Temperature Control with Upgradeable Firmware
Stainless Steel Thread & Spring Connector
Three Replaceable Cells & Magnetic Back Cover

Reuleaux RX200S
Wismec Reuleaux RX200S is an upgraded version of the most popluar device Wismec RX200, featuring the unique exterior design and variable temperature control function. Integrating a 0.96 inch OLED display screen with a vertical display arrangement, RX200S mod makes adjustment and use easier than ever before. In addition to hte high power output of 200W, RX200S battery mod is compatible with Ni200 Nickel, Titanium and Stainless Steel heating materials along with a three memory TCR mode.



Parameter
Size: 50.0*40.0*84.0mm
Thread Type: 510 spring loaded thread
Cell type: High-rate 18650 cell (discharging current should be above 25A)
Output Mode: VW/TC-Ni/TC-Ti/TC-SS/TCR Mode
Output Wattage: 1-200W
Resistance Range: 0.05-1.5ohm for TC modes
0.1-3.5ohm for VW mode
Temperature Range: 100-315°C/ 200-600°F (TC modes)
Standard Configuration
1 * Reuleaux RX200S (no batteries)
1 * USB Cable
1 * User Manual
1 * Warning Card

Brand-new Interface with 0.96inch Large Display Screen
The user-serviceable interface with switchable battery indicator will bring you unexpected convenience. And the 0.96inch OLED screen presents all parameters fully and clearly.

200W High Power Output with Temperature Control System
Powered by three 18650 cells, the device can reach the 200W maximum output. The optional VW/TC-Ni/TC-Ti/TC-SS/TCR mode will provide you with wonderful vaping enjoyment.


Stainless Steel Thread and Spring Connector
The exquisite stainless steel spring loaded 510 connector makes the device much wear-resisting and adaptable.

Reverse Polarity Protection
Reverse polarity protection is effectively achieved by the application of special battery anti reverse circuit in the circuit board.

Upgradeable Firmware
You can upgrade the firmware through the micro USB port. And the upgradeable firmware will make the device always up to date.

Charging
It is better to take out the cells and charge them through external charger.
Moreover, it can also be charged via USB cable.

